Questions & Answers for: Honda cam sensor

cam sensor After replacing the timing belt my son left the cam sensor lose, now I need to tighten the cam sensor but I have not been able to find out what the clearance should be. Well most cam ...

...engine light is on and the codes read it is the #1 position cam sensor. Myquestion is whats the air gap setting on the sensor . thank you if you bought a cam sensor than it should be already

...cam sensor. It does not necessarily mean the sensor is bad. It can be one of these things. 1. Cam sensor wiring routed too close to spark plug wiring (causing interference) 2. Poor wiring connection ...

the engine has an overhead cam it could be the cam position sensor.If the threads are leaking remove it wrap teflon tape on the threads and re-install it. If oil is leaking threw the sensor replace it

cam sensor. Car is now not starting at all. Wants to turn over but doesn't it floods out. Is this a timing chain issue or cam sensor issue that is causing the car not to start? A faulty cam sensor can

...back of the cylinder head.behind the intake cam and the exhaust cam. They are directly THe crankshaft sensor is on the timing chain cover, low down near the crankshaft. Can you give some more

...CAM position sensor, located behind the timing cover. Here's the info for it: part # 370598 SENSOR ASSY., TDC CYLINDER Retail: 49.32 Wholesale: 36.99 That error comes from the CAM SHAFT POSITION ...

...cam shaft position sensor on a 2004 Honda Odyssey Where is the Cam Shaft position sensor located on the 2004 Honda Odyssey 2 or more. There's a lot of stuff in the way that has to be disassembled to ...

...Honda accord where is cam sensor It should have a distributor instead of a cam sensor. It is in the distributor. If it is coding for crank sensor, most likely you will have to replace the

Lication of cam Sensor/crank sensor 94 honda accord EX crank sensor is behind the main crank pulley by the belts. Cam sensor should be part of the distributer.