location of cam shaft sensor in 1991 ford thunderbird ITS ON THE TOP FRONT COVER OF THE ENGINE
...cam angle sensor (CAS) === THE FIX is replace the damage CAS Inspect to make sure the fans are operation Coolant change to 65/50 mix instead of 50/50 If you're living in sub-zero are then check the ...
...cam sensor and put that (cuz the code popped up for it once before all this) in now my car still will not start all the plugs are wet and it smells like gas very strong when i crank on it. i put new ...
...Cam shaft position sensor. I changed the sensor. Didn't work. I changed the whole synchronizer assembly. Didn’t work. I checked the wiring, all good continuity (I didn’t use a break out box, just ...
cam shaft sensor on a 1997 ford thunderbird 4.6 V8. Does anyone know ehere it is? Hey, I do! I had a problem with the cam position sensor on my 97 T-bird two years ago. The symptoms were weird, like a
Question about 1997 Thunderbird LX
1996 ford t bird 3.8 engine wont start no spark on4 plugs have replace crank sensor cam sensor pcm try to replace the distrubator
...cam shaft postion sensor . my car has loss of power and it seems like the transmission is skipping or in strain . i also have a bad catylic converter on the drivers side. can this cause this problem ...
...cam shaft sensor is OK, but the wiring to it gets broken by the belts, it is a design flaw. Unfortunately one has to pull the balancer to replace it, I believe. I have never done it but paid twice to ...
Question about 1989 Thunderbird
out while riding,after a few mins it fires up again? I have had two new coils fitted and a year ago a second hand igniter Could be crank/cam sensor failing as it gets hot, or even used igniter failing
2002 ford Thunderbird: Were are the Cam Position Sensors Were are the Cam Position Sensors (same 3.9L as Lincoln LS, but 2002 CPSs are not on the valve covers like 2003 Lincolns) It is located at the ...
Usually answered in minutes!
523 Questions
505 Questions
431 Questions
394 Questions
202 Questions