cam sensor location wher is my cam sensor located on my 1998 gmc sonoma If you have a 4.3 vortec the cam sensor is in the distributor. Hope this helps you, kee3p me posted.
where does the camshaft postion sensor go? If i remember correctly the camshaft sensor on the 4.3l v6 is on the timing chain cover or possibly behind it.
I have a Gmc 1995 safari changed throttle postion sensor,new plugs and wires but engine still will idle faster then normal and picks up speed when driving air leak somewhere or idle control valve
cam position sensor where is the cam positioning sensor found on a 1998 gmc jimmy? cam sensor is located in distributor.
i need to knwo where the cam position sensor is on i need to know where the cam position sensor is on my GMC Jimmy 1999 cam sensor is in the distributor. also know as the pick-up assembly.
...postion (Not Start) listen to see if you here the fuelpump comes on for two seconds. does it? if yest then pull a plug wire and put in a screw driver in the wire and get it 1/4 away from ground then ...
...postion actuator, this in return controls cam angle ****** and cam angle advance.. They need to hook a labsope and see what the cam phase is and a flight recorder to see where it is. You need to ask ...
...that is good check and replace crankshaft postion sensor and or cam shaft postion sensor as they tell the ecu when to fire the spark and to what cylinder lmk if it helps please give me good ...
how to change cam sensor 2001 gmc yukon wanting to find the location of the cam sensor on 2001 yukon xl how to change cam sensor gmc yukon model 2001
...out crankshaft postion sensor see the cam sensor tells the crank sensor that the piston in cylinder 1 is all the way up and to fire the fuel and spark then the crank sensor fires the fuel and ...
Usually answered in minutes!
2,225 Questions
1,363 Questions
1,368 Questions
1,418 Questions
1,123 Questions
