...master link then separate the chain by removing the link then place both ends of the chain onto the cam sprocket and reconnect the link. If you have a continuous chain I would need to see first hand ...
...rode threw ur spark plug whole and turn the bike over till the piston is at the top and check ur cam ...
...and if you do not have good mechanical knowledge you will do severe damage to engine trying to fit cam ...
what is the torque specification on the cam bolts for the subject bike? Take your choice> 1.2 Nm to 1.6 Nm or 104 inch pounds to 139 inch pounds or 8.68 foot pounds to 11.6 foot pounds. Please rate
...250 and when I put it back on my brake was locking. I loosened the brake line bolts and some fluid came out so I had to put more fluid in and now the brake won't work. I have tried all the ...
Usually answered in minutes!
47 Questions
15 Questions
