Questions & Answers for: Harley Davidson FLHRCI Road King Classic cam master

how do you adjust the front brake lever, or the ''switch'' so the brake light will stay off while moving down the road Loosen the two bolts that hold the master cylinder onto the handlebars and make ...

I have a problem with the back brakes on my 2001 road king, they work for a while but on a long ride , they dont then after a while they do again...what can i check.It feels as if it looses pressure ...

My front hand brake on my 2004 roadking classic sq... My front hand brake on my 2004 roadking classic squeezes all the way to the hand grip. And hardly helps stop the bike. Need to use back brake ...

...comming from around oil pump when the engine is reved up in neutral There's a lot of stuff in the cam chest in the Twin Cam that wasn't in the old Evo and earlier engines. When is the last time you ...

...problem with oil pump on 88' S in 2000 Well, it depends. There was indeed a known problem with the cam bearing plate and that's what the oil pump is mounted on. Seems H-D used roller bearings

...Hi Anonymous, for more information on your question please visit the websites below and good luck: Cam Replacement on Harley Davidson Twin Cam including Pushrod

front brake master cylinder not much lever bled brakes and rebuilt master cylinder no change There should not be a great deal of lever travel.

...master fuse and cam sensor still wont crank Confusing. The cam sensor does not crank so what are you saying about that and was the master fuse blown or you just replaced it as a possible solution to ...

timing is off replace cam change and the bike is popping Valve timing is off then so you need to redo your work and time the cam properly. You could be out a tooth, either on the rear side chain or ...

2007 Fatboy and brake light stays on after braking. How do I adjust lever to stay out. Hi Anonymous, move the switch housing closer to the master cylinder. Good luck