Questions & Answers for: Saturn SL cam master

I have a leak between the master cylinder and brake booster, and, my brakes are kind of spongy. What can it be? you need a new master cylinder unit need to replace that asap very danderous you might ...

Correct position of the camshafts and cranksharfts for timing of my 99 saturn SL2 the cam shaft sprockets have marks on them that say" front" and have a hole,, the marks should be up and level on the ...

there is a metal rod attached to the clutch pedal but came out of the sleeve it was in will this be a problem to fix this metal rod is the cluch master cylinder push rod its held into the master ...

...saturn sl2 that i will be replacing the cylinder head. I need to know the timming sequence that the cam's need to be at? Piston one up, and the cams on the same piston need to be, furthest away from ...

spongy brake pedal I have already bleed entire system. do u think it could be the brake booster or the master cylinder could be the master but NOT the booster the booster increases pedal effort and ...

cam? THANKS I think the best method is to buy the entire master/slave unit which comes prebled. I have seen them for sale on ebay, but you can also get them at autozone and advance. Basically the same

where is bleed screw on master slave cylinder I guess if you could decide which you are talking about, the master or the slave, it could be answered. masters do not have bleed screws, slaves do. slave

How to bleed brakes on 1997 Saturn The brake system bleeding procedure differs for ABS and non-ABS vehicles. The following procedure pertains only to non-ABS vehicles. For details on bleeding ABS ...

...P0341 code basically means that the powertrain control module (PCM) detected a problem with the camshaft signal. The camshaft position sensor (CPS) sends a specific signal to the PCM for Top Dead ...

master brake bleeding Don't need to bleed a master cylinderWhen you have some inside pushing on the brake pedal, as you open & close the bleeders, the fluidwill leave the master & go ...