Questions & Answers for: Dodge Stratus cam master

What are the torque specs in lbs for cam, exhaust manifold, and intake manifold bolts on 2007 2.4 DOHC dodge stratus? cam sprocket is 250 in. lbs. cam tensioner and bearing caps are 105 in. lbs. ...

98 dodge stratus,engine light came on and it died and won't start now.What could be wrong? when you crank the engine over now, does it sound different than before? if yes, you probably have a broken ...

...Timing belt might look good on top but it might be missing the teeth at the crank make sure the cams are turning, if not, replace the timing belt. if belt is o.k., check the cam sensor. if the ...

master cylinder problem does anyone have an idea how much it costs to have a master clinder on a 2000 dodge stratus repaired? just want to have some kind of idea how much I'm looking at. Replace ...

my 1999 2.4 dodge stratus wont run unless i unplug cam sensor its a new sensor and a new crank sensor I'm having excatly same problem, found this sequence to ge the car running again..turn off ign

...bunch of trouble? Make sure your timing marks are lined up and start putting your belt on the rear cam first that would be 1,3,5 cam. Then route it under the water pump and up around the front cam ...

...CAM LOBES SET WOULD HAVE BENT EXHAUST VALVES. I'M A MASTER TECHNICIAN AND USED OLD SCHOOL TECNIC TO FIND TOP TDC #1 COMPRESSION STROKE. I WOULD LIKE TO HAVE MY MONEY BACK. [email protected] let me ...

I can not find the proper cam settings.1996 2.4 DOHC. I believe for your engine the cams are set up on the back (drivers side) of the cams. There are flat spots on the cams that have to be level with ...

2002 dodge stratus clutch has no pressure. just drops to floor. First make sure there is fluid in the clutch master, if its full then you may have a bad clutch slave or master, if empty or low you ...

which brake line goes to which which wheel from the master cylinder? I have a 1998 dodge stratus 2.4 DOHC. I need to know which brake line is running from the master cylinder to the driver rear? Any ...