...same oil as the engine? I changed my gearbox oil and also double checked level as the amount that came out wasn't enough? Since then pure smooth cold & Hot, so maybe the wrong viscosity oil? Nice & ...
Cam Chain Bike is a 1996 ZX6R. Cam chain is very noisy. Removed tensioner and it seems to work fine. I saw manual adjusters on ebay. Is there more adjustment in a manual one? Could I get the seaon out
Engine swap 04 zx10r on a 06 zx 636 f will a 2004 kawasaramki zx10r motor fit on a 2006 kawasaki zx 636 frame? The frame mounting points are completely different. A zx 636 frame wraps around the motor
ticking noise in 6th mainly on deceleration i get a ticking/vibration noise when in 6th gear mainly on deceleration Check your chain and sprockets, sometimes the chain wears the sprocket out, "curving
bike has a loud ticking noise, what is it bike has a loud ticking noise when running, replace the chain tensionare.
First and second gear clunks when being put into gear, other gears are fine when rolling have you checked your chain tension because that can cause it to clonk if to slack and also check the condition
chain tension can you tell me how much up and down movement there should be in the chain please in cm Usually you want about 1 -1.6 inches (35-40 mm) from the bottom of the chain to the bottom of the ...
Question about 1995 ZZR 600
...The bike has a loud whine while riding under load what could the cause be? good possibility you need to replace cam chain tensioner. also inspect your chain and sprockets, they might be worn
Thinking about purchasing .Are there any main areas of problems/faults or modifications required on a '55 plate machine?(15k on the clocks) hi, fairly good bike , look out far worn chains, sprkts etc,
Has loud tickin noise from top end,sounds like a timing chain related noise Most motorcycles need to have the valve clearance adjusted every so often. When the tolerance get to loose it will ...
Usually answered in minutes!
35 Questions
26 Questions
23 Questions
21 Questions
22 Questions