the timing chain where is the tensioner and proper procedure to tighten the timing chain It has an automatic cam chain tensioner. If you are getting cam chain rattle, I would look at worn guides/chain
...cam/chain tensionor has gone bad, is it possible that the chain is just not lined up properly and just needs to be "re-aligned"? how easy is it to replace the cam chain tensionor? from what i have ...
...cam(s)if you can get a chain with a joining link or get one from a bike shop & ask them to split it for you, you can just take the top cover off the motor, line the cam timing up (piston @ top ...
...cam chain rattle, i believe this to be a fault on this model, can the cam chain tensioner be upgraded or replaced with one from another model? Regards Rob sorry to tell you this but it might be the ...
cam chain noise on a CBR1100 from 1998 Can this be ajust ? if so where is the bracket on the engine Cam chain normally must be replaced, but sometimes cam chain tensioner may have some space to put ...
...Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam chain? tensioner springs? cam ...
How do you adjust the cam chain? the cam chain is automatic adjustment, when the adjustment has ran out, the cam chain needs to be replaced.
noisy cam chain You need to replace your cam chain tensioner assembly and possibly the cam chain guide. This is a common problem in older 600's.
...chain from the cam gear, you may have to remove the cam gear bolts and the cam gear to get the chain off. I reccomend that you mark the position of the cam gear so you put it back correctly. If you ...
Question about 1986 VF 1100 C
...cam chain is worn/stretched, it needs to be replaced. Here is a direct quote from the manual: "Measure the amount of the cam chain tensioner projects as shown (there is an illustration). Replace the ...
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions