Questions & Answers for: Mazda MPV cam

Timing set cams to crank? 2001 mazda MPV v6 ,2.5 I am putting in timing chain and need to set cam and crank do you know the marks? complex job chains have coloured links to line up with gears and a ...

how do I line up the timing marks on the cams on mazda mpv? there are several markings on the cams. which do I use and how do I line them up? Hope this helps you.

I need to know wich key way to use when installing the timeing gears onto the camshafts on a 1989 mazda mpv 4.0 liter v-6 do it by appliance of science ,TDC no1 then exhaust and inlet valves on the ...

Hi dear Does the MPV 3L 2003 Have a cam belt or Cam chain please? It has a timing chain.

when it is in time were are the time mark be at cams & cranke You will need the manual to see where the timing marks are.The timing marks should have been aligned before you removed the old ...

...some more precise diagnosis and repair strategy. This is code for multiple misfire. Check that the cam sensor is OK and that the timing belt has not jumped a tooth on the cam ...

when car is on whether driving or idling, it makes tappping noise. Could be lifter noise...valve cams, parts of the engine, are supposed to move the valves up and down to let in air and let out ...

...Coil, plugs & wires are fine. Don't know where to look next? HELP run fault codes to check for cam/crank sensor fault. check that the cam shaft is turning (broken timing belt) check immobiliser ...

how do I replace a cam seal on a 1996 Mazda MPV How do I replace the cam seal on driver side? You have to pull the Timing Belt off in order to change it and make sure you mark the CAM before you ...

...the exhaust manifolds, remove heater hoses from heads, remove, rocker covers from the heads,remove cam belt covers and cam belt, undo the head bolts, and remove heads, this is a short version of ...