Questions & Answers for: Hyundai Accent cam

cam belt change on 1.3 accent when replacing my cam belt will i need to by a kit,or replacing the cam belt will be enough REPLACING THE BELT AND ANY WORN PARTS WILL BE ALL THAT IS NEEDED All you need ...

How many Lifters are there in a 200 Hyundai Accent? if it is an over head cam motor they dont have any lifters valves work directly off the cam if not you have 1 lifter per valve example 16 valve ...

if my cam is off by 1 tooth, how can I tell? How If I get an error code of 0340 after my timing belt replacement on a 2005 Hyudai Accent, my cam could be off by 1 tooth. if my cam is off by 1 tooth, ...

I have a noisy cam follower on a hyundai accent is it a big job? No such thing as a 'cam follower' on any engines. Need clarification from someone who knows what they're talking about. Common ...

We need to know where the cam timing marks go on a 1998 Hyundai Accent.The cam was turned after the belt was removed. We need to know how to aline the camshaft. Hi The cam dowel should be at 12:00. ...

...do it myself but don´t have the timming marks diagram, can you please help me? if its a single cam the marks should be on the backing plate and if it is twin cam the two marks should face each ...

2005 hyndia accent check engine light came on,1 day later car stalled and would not start. code p0340 cam shaft sensor replaced it still wont start gets spark fuel pump turns on any thoughts or ...

...with 122,000 km on it. Long story short, had to get a new head gasket put on, so rocker cover, cams, everything had to come off. Work was done and everything was put back together. I know where ...

Timing marks on cam for timing chain 2007 Hyundai accent How many links are between the marks on the chain attaching to the cam shaft. we already replaced the timing belt. we are looking for the ...

I have a 2001 Hyundai accent with the 1.5 l single overhead cam I need the torque number and sequence for The rocker shafts I have a 2001 Hyundai accent 1.5 l single overhead cam I need to put valve ...