Questions & Answers for: Nissan cam

Ad

Question about 1993 Sentra 4 Door

1 Answer

cam timing with no colored links on chain!! i just got through replacing the head gasket on a qg18de motor on a 03 sentra, i rotated the crank to tdc ( red line on the harmonic balancer) but im havin ...

Ad

how can i tell if my 1994 nissan maxima is single or dual cam? Pretty easy to tell even without taking the valve cover off. If it is a dual cam, then the spark plugs are lined up right down the middle

Ad

cams need to be put back after being removed where do they go? cams were removed by someone else i am trying to put them back in there original place with engine at top dead center where do the cams ...

My check engine light is on and I've been told it is the cam sensor, but I can't find one. It's a 2005 nissan altima. Do they have a cam sensor and a crank sensor? This engine has both. Nissan ...

...the gears in their correct positions. Before installing a new chain, soak it in oil. OHC (Overhead Cam) Engines Some OHC engines use a chain drive; others use a belt drive. Removing the cover on

Question about 2002 Sentra

1 Answer

...its a timing issue. i had changed the head gasket and when putting everything back i installed new cams. i pulled a plug out and left it connected to the coin on plug boot to see if im getting a ...

Question about 2002 Sentra

1 Answer

cam bearings right head 1994 pathfinder the cam has froze up. distroyed the timing belt at the 6 O'clock position Therefore I believe the cam bearing/s had to have seized up. can I change the bearings

Question about 1994 Pathfinder

1 Answer

right head cam seized up is it possible to change the cam bearings after removing the valve cover to fix the problem?? overhead cam heads do not usually have cam bearings. If your cam has seized, it ...

how to tell the intake cam from the exhaust cam o my 2008 Nissan titan I did a head gasket job on my titan, and my cam"s got mixed up ,you would think the cam"s would mirror from head tohead **** they

Where is the cam sensor in a 2002 nissan quest? HI Chuck! The cam position sensor is inside the distributor on the quest. If the cam sensor has gone bad you need to replace the distributor assembly as

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,527 Questions

2003 Nissan Altima
2003 Nissan Altima

1,415 Questions

2000 Nissan Maxima
2000 Nissan Maxima

1,262 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,089 Questions

2002 Nissan Altima
2002 Nissan Altima

1,259 Questions

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...