Questions & Answers for: Ford Focus cable stuck

cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the

...stuck, as I don't know how to plug the cord back in, or exactly how to fix the original problem. cord??dont you mean a cable ,this is the inhibitor so you cant put in gear without brake on .as button ...

...stuck butterfly valve inside the trottle body = clean out with trottle body cleaner try to get most of the black build up with a old tooth brush 3 bad trottle cable= feel the cable make sure it moves ...

stuck wont move most likely the brake cables have seized up- it is best just to change them, if you do get the handle to move it may cause the brake to stick on and will warp and ruin your back brakes

cable, can all rust causing it to freeze. The best thing is too use it at least 2 times a week to keep it moving freely. Thousands of people never use it, then one day there on a hill and apply it, by

...stuck in what ever gear we had been driving in. we realized that it keeps popping off and the ends need to be replaced. as ford told us once they are removed they are supposed to be replaced new. we ...

...2 locks when you close it one click easy and the other hard click check your second lock and the cable attached to it maybe the cable stucks due to a bad spring or due to rust in the cable get it ...

...cable unraveled internally at the switch, it just happens to be stuck in the defrost position, ive had the same issue, just replace the blend air door cable/switch and its fixed!! looks to be about ...

...stuck down so i cant slip the boot off. How do i fix this? Your brake cable is probably rusted inside the cable housing, especially if you live in an area of high winter salt use on the ...

...a new battery?? check for cruise control - check cable for cruise control is not stuck. check throttle cable may need oil poured into the cable. Check floor mat is not wedged onto accelerator ...