Questions & Answers for: Poulan cable stuck

...stuck in handle. remove handle cover and inspect. If parts broken follow this link for parts breakdown. http://www.ordertree.com/modelinfo/PWE/PP4218AV/75.PP4218AV.1.7.1.html I had the same` problem. ...

...cable replaced and the blades still want disengage when the disengagement handle is released Possibly the idler pully arm that is mounted on the deck is rusted and the pully is stuck engaged. This ...

...stuck at high speed, how do i idel it down the kill switch lever cable does not work and i cant idel down the engine. i can start it but i cant idel it down . how can i do it. If you have a Lowes, ...

...cable does not apear to be stuck YOUR THROOTLE LINKAGE IS BINDIND WITH THE ENGINE OFF MOVE THROTTLE BACK AND FORTH WATCHING THE LINKAGE ON THE CARB, SPRAY LINKAGE WITH PENETRATING OIL SO IT LOOSENS ...

...stuck Remove the air cleaner assembly to see the carburetor throttle mechanism and open the handle so that you can access the throttle trigger. There should be either a cable or wire connecting the ...

...cable I see liquid going out from the muffler. I thing that when I turn it some gaz when everywhere. My machine has last than a years. Thanks you have got dirt in the carburettor, this will need ...

...stuck. Remove the tube that holds the flex-drive shaft from the front of the motor cover.Remove the rear engine cover. Remove the throttle cable from the carburetor. Mark and unplug any wires for the ...

...STUCK AND WON'T RELEASE check for saw dust or wood chips in linkage check cable for sharp bends check that the return spring is on properly throttle is a mechanical link so if its stuck something ...

...cable that links from the trigger to the carburetor is stuck. This can happen due to trash and dirt stuck in the trigger area, or the carburetor needs cleaning. Or the cable or wire to the carburetor ...