Questions & Answers for: cable back vizio tv broke

Question about VU37L 37 in. LCD TV

1 Answer

cable or something? Thank you. Had the same problem. My TV must have been puht onto RGB input. So I plugged my computer in to the RGB on back and turned on the TV. It stayed on. Then switch it back to

Ad

...back for a computer monitor. Yes, if you'd like to hook up your computer to your TV you can through this plug, it looks like a (most likely blue) with 3 rows of holes/pins that you can plug another ...

Ad

back vents for a white light to make sure the backlight still works. I ordered a new "main PCB" from tigerdirectparts.com (you can also use searspartsdirect.com). This is the circuit board with all of

cable if you don't have one. Install the switch between the X-Box and the Vizio and VOILA! X-Box is back. The Vizio recognizes the switch as a valid HDMI source and could care less where it is getting

back of tv -( cable adapter nipple) is broke off in yellow input stationary outlet in back of tv ? How can you remove broken piece ? Thanks You will find it easiest to take the back cover off and gain

Question about VW32L 32 in. LCD HDTV

1 Answer

...cable connector in the back of the tv how can I solve this problem You can get the replacement kit..wich is better than replacing the tunner completely. you can get it at tvpartsandmanuals.com its an ...

...cable box off then back on and it resolves the issue for a while. A non supported device. You may want to use the RCA. Cable that is available on ebay. I had run into this before. It is the software ...

cable cord broke off back of vizio tv other ways to get cable Replace the cord or watch TV at a relative's house. Seriously, If you cannot replace the cable, your cable company will repair it for you.

Question about FLM-3732 Television

1 Answer

cable for the TV was bad. I tested this by plugging it in to a similar TV that uses the same AC adapter, and it wouldn't turn on either. Like the original TV, though, the little standby light turns on

...back to life. Reassembled and have just flashes when powering on. Not sure if I broke something or maybe a ground issue? You were lucky, only 99% of people here get a satisfactory results trying to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...