Questions & Answers for: Craftsman ca 100

Question about 20 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

...transmission it will not move forward or backwards. My wife threw away the owners manual and the local service center wants 100 just to pick it up to service it before we get it fixed. is there an ...

Ad

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

need older 18hp b@s hrizontol shaft motor I RANMY 1987 SEARS GARDEN WITH 18HP B&S TWIN CYL WITH HORIZONTAL SHAFT OUT OF OIL I SHUT IT OFF WHEN IT STARTED LOOSING POWER AND PUT OIL IN IT AND ...

Ad

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

john deere lawn mower LT 100 It wont pull and acts like the brake is on but the brake is off , what can be causing this? sounds like the motor is froze, open the lid and try to turn the motor by hand,

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

will not start replaced plug gaped .030 try new coil cleaned carb checked compression 100 psi all it will do is back fire is it turning over or not the one thing you can try is look at 20 amp fuse to ...

Question about 20 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

...starting! The key turns but nothing happens immediately. Next I notice smoke coming from an electrical part on the engines right side which this part is connected to a red cable. (It looks like a ...

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

...order to mow correctly and to cool the engine properly. Running it as less than full throttle will cause the engine to overwork and possibly overheat thus shortening it's life. It will also not cut ...

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

1 Answer

...smoke persists longer, a valve service is required.If your engine is burning oil continuously, it can be due to the following:  1.  The crankcase is over-filled with oil.  2. ...

Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model

2 Answers

17 hp craftsman lawn tractor valve adjustment what are the valve clearances You watch the videos, they said different.  I go with .004 on intake& EXHAUST. Type in adjust valves ( your engine)

...point in diferent directions and see no adjustment how do you adjust The rods going to each wheel can be adjusted. Remove the link atacked to top wheel and loose nut, screw link in or out to aliegh ...

...I turn it off and want to start, same all over again. What is wrong? Off the cuff, I'd guess the carburetor is gummed up. Gasoline is not good stuff. If left in a mower tank, it can evaporate over ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

john h

Level 3 Expert

29494 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...