Questions & Answers for: bypass airbag light

Question about 2000 Grand Cherokee

1 Answer

...bypass it enough to pass my inspection... i dont know of any state that fails a vehicle for an airbag light but it would be wise to get the system checked out. it means there is a problem with the ...

Ad

...airbag system you must disable it first. If i were to turn off battery wait, disconnect the airbags, then reconnect the battery and attach the MES connector wouldn't a new error code occur? Please ...

Ad

Question about 1996 Odyssey

1 Answer

...bypass the airbag circuit. Check for broken wire under or beside passanger seat. these have a tendancy to brake cause the seat gets moved back & forth especially if the wireing has been routed ...

seat is gone,how do I bypass the seat occupancy sensor, airbag light stays on Its a weight sensitive sensor, so you would probably have to come up with some sort of resistor. I doubt you can bypass it

...it says sensor on passenger side? The seat pressure sensor. if it's the seat sensor you can find a BMW Airbag Bypass, Seat Occupancy Sensor Mat Emulator on ebay, they are cheap and it works

Question about 2009 Impala

1 Answer

...airbag light? if the air bag light is on there is a code that needs to be checked out. if you have it checked and tested for the problem the light will go out. if not and you bypass and turn off the ...

Question about 2009 Impala

1 Answer

...light). Now this can be expensive to fix ( unsow seat, replace sensor blah blah blah) up to 1g. There is a cheeky way to bypass it so the airbags are always activated. Look on youtube for bmw ...

...the steering wheel, and they are hard to replace, and will set a airbag light ON. you might be better off buying a steering wheel assembly from a junk yard, the dealer can turn off the airbag

...bypass in airbag plug below steering column feeding clockspring. reconnect battery and see if light goes out after 5 seconds 2. Check passenger seat sensor operational. To test - with ignition off - ...

...airbag light flashs when car is first turned on then stays on well driveing how do i, get it to turn off with out useing a obd11 scanner? Basically, You can't! That light is on for a Reason! The OBD ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...