Questions & Answers for: GMC Sonoma bush stand by

starter motor how do i remove starter from 91 gmc sonoma pickup 4x4 4.3 lt engine It's easy, 2 9/16 bolts, remember to disconnect battery and make a note of the wiring on the starter. there is bushing

1991 sonoma clutch question I have a 1991 GMC sonoma with the 2.8 V6. Its a 5 speed tranny and the throwout bearing went out a while back. I got a guy to put it in for me but now it still has a loud ...

need to know if theres going to be any tension once i losse the ball joints up and lower on 2002 gmc sonoma truck yes there will, jack the vehichle up and lower it onto jack stands onto the lower part

1998 sonoma vibrates violently at certain speed my 1998 gmc sonoma drives fine at under 45 but anything over that it vibrates like crazy. was told it was stabilizing bushing or something like that and

The extra door on the drivers side has a repeated problem with the opening mechanism. The assembly has broken a number of times with minor pressure. I have talked to a number of Sonoma and Chevy S10 ...

How do I replace the long screw that holds the door up on the door hinges,on a '97 gmc Sonoma? I have done a 100 of these.The hardest part is going to be to reinstall the spring on the lower hinge

How many control arm bushings do i need to replace my ball joints? You don't need any control arm bushings to replace your ball joints. They bolt to the end of the control arm and to the hub assembly.

want to put new bushings in front end but know the exact name of them all, can someone help me with this you have upper control arm bushings and lower control arm bushings, a total of four on each ...

gmc sonoma clutch MY CLUTCH IS WAY TO HARD WHEN I TRY IN PUT IT TO 1ST GEAR. CLUTCH PEDAL IS VERY LOOSE ASWELL.. WATS THE PROBLEM? CK BUSHINGS ON CLUTCH PEDAL, WORN OR MISSING BUSHINGS WILL CAUSE ...

how do i replace nox sensor on 1998 gmc sonoma 2.2 l Jack up vehicle and secure with safety equipment like jack stands , part is located at the oil filter side of the engine block near the rear of ...