drawing up bobbin thread Hi ok everytime i try to draw up the bobbin thread it catches on the shuttel hook. I am a seamstress but i can't figure this one out. this was my moms so can you help? If the ...
why does the thread keep breaking ? why does the thread keep breaking on an old Necchi sewing machine? The most common reason is the needle not inserted correctly (backwards), other causes can be ...
the needle jams when i start sewing the needle jams when i stsrt sewing necchi sewing machine model # 3205FA Could be threaded wrong - check manual for proper threading Needle could be bent - check ...
Question about 3537 Mechanical Sewing Machine
...like the needle is bent & needs to be replaced. check your throat plate to see if there are any burrs on the plate because they can snag the fabric if you feel any burrs on the plate take it to a ...
Question about 3537 Mechanical Sewing Machine
...of thread to see if the notch on the spool is catching the top thread check to see if there's a burr on the bobbin case I hope one of these suggestions helps you please rate this using the thumbs ...
Question about 3537 Mechanical Sewing Machine
...(not from the front), the flat side should face the throat of the machine. There could also be a burr somewhere that is catching the thread and causing the skipped stitch. What to Do If Your
Question about 3537 Mechanical Sewing Machine
Can't get my needle to tighten in my necchi nc204d My old needle bent, need to put in a new one, have used my manual, I know the flat side goes to the back just like in my old singer. Get the needle ...
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
56 Questions
44 Questions
