Questions & Answers for: burr Sewing Machines

Ad

Question about TL-432DE Mechanical Sewing Machine

1 Answer

...the machine check the tension to see if it's correct check the needles closely to see if there's a burr on the needle eye check the throat plate for burrs check the loopers for ...

Ad

Question about TL-432DE Mechanical Sewing Machine

1 Answer

thread breakage on Juki TL-2000Qi While quilting on a Grace Quilt Frame the thread is breaking/shredding. Tried new needle etc. Still happening There are a few reasons the top thread may break. - ...

Ad

Question about TL-432DE Mechanical Sewing Machine

1 Answer

far. I changed threads, needles , adjusted tension, I am at a loss here. Any suggestions. Check for burrs.  Even the tiniest burr can break thread.  Check the needle throat plate, the bobbin

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

...ve put the bobbin in upside down (it's not unspooling correctly) 2. The bobbin case or bobbin has a burr. 3. it's rare but a needle plate with a burr can do this too. if you find burrs.... get some ...

Question about Drop-In Bobbin 16231 Mechanical Sewing Machine

1 Answer

why does my needle thread break too much tension on top or a burr on needle. Whenever thread breaks its usually the needle is bad. also check hook with finger for burrs caused by the needle. burrs ...

Question about Disney ULT-2002D

1 Answer

removal of bobbin burrs I've noticed scratches on the bobbin basket. How to remove them? you can use a very small file and very very gently rubb till the burr is removed or very fine sand paper ...

14u32 singer serger has a burr on the bottom mechanism so bobbin won't work The repairman said it was a burr and can't be fixed. I think he didn't want to bother. Does anyone know if this part is ...

14u32 singer serger has a burr on the bottom mechanism so bobbin won't work, so says the repairman. Is this a replaceable part? If so, how much does it cost? The repairman said it was a burr and can't

...plate or in the bobbin area. When a needle deflects, it will sometimes strike somewhere and cause a burr or rough spot. That rough spot will then catch the thread and cause it to break or shred. Wrap ...

What are burrs in a seeing machine Burrs are little nicks that have occurred by needles or other items by manufacturer defect or the item striking the machine causing a nick, sharp dent or edge. If in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...