...well the thread. but its the case the is giving me problem. The case probably has a scratch or a burr on it. Take it out of the machine and examine it for burrs or scratches.If you find some they ...
...sure the thread is in between the tension disks with the foot up. Its also possible that there is a burr on the hook part that goes around and grabs the top thread. The thread will catch on the burr ...
I have a Singer 7426. The needle is hitting the hook area incorrectly, making a jerking motion with the needle along with a tapping noise. Any idea how to correct it? the needle probable is bent-has ...
Question about CE150 Futura SewingandEmbroidery Machine
...ce 150 bobbin case keeps snagging thread as sewing thread picks up bobbin thread, seems to be a burr near the spring that holds case on right side For a quick fix, take the bobbin case out of the ...
Question about CE150 Futura SewingandEmbroidery Machine
...race area, if none of that helps your problem, check the hook that goes around the bobbin for a burr that could be catching and not releasing the upper thread on its trip around the bobbin.
Question about 3116 Simple
My Singer 3116 Simple is tangling up by the bobbin and leaving knots of thread on the underside of material? Thread it right...with the lever up. Then adjust your top tension. If you still
Question about Quantum 9910 Computerized Sewing Machine
...singer bobbin my machine is 4yrs old and this has just started to happen plastic bobbins can get burrs, remove your bobbin and run your nail around the edge of the bobbin... if you feel it click ...
Question about Quantum 9910 Computerized Sewing Machine
14u32 singer serger has a burr on the bottom mechanism so bobbin won't work The repairman said it was a burr and can't be fixed. I think he didn't want to bother. Does anyone know if this part is ...
Question about 14SH654
14u32 singer serger has a burr on the bottom mechanism so bobbin won't work, so says the repairman. Is this a replaceable part? If so, how much does it cost? The repairman said it was a burr and can't
Question about Confidence 7469 Mechanical Sewing Machine
...happen. Every once in a while.. especially after a needle break... your bobbin can get a nick or burr... as can the hook. Inspect carefully with a strong magnifying glass. If you find a burr try ...
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions