Questions & Answers for: burnt ecu

Question about 1997 Golf

1 Answer

...ECU) A resistor was found burnt & replaced thereby the car was ok.After about a week the ECU seized again.This time no fault, but whenever the ECU is disconnected for about a day or so & it is ...

Ad

Question about 1997 Astro

1 Answer

ecu burnt out? 61000miles no problems ever was at cafe went to start turned over all lights everything works but not firing ecu burnt out ,,take it somewhere else and tell the slack jawed yocal to get

Ad

Question about 1992 Firebird

1 Answer

...ecu prom (?) is burnt out. Help! We've purchased several ecu units with proms, but they don't seem to work. The car responds randomly to accelerator input, and our mechanics' computer pointed towards ...

...burnt out ECU and wiring harness. All has been replaced and everything works except no fire to fuel pump. Engine runs when jumper wire puts fire to pump. Any ideas? Thanks, Don You need to have the ...

...burnt leftovers). A Mitsubishi dealer SHOULD be able to find you the correct ECU. I don't doubt them that the ECU is the problem, on those years, it often can be. If the dealer doesn't have it, look ...

Question about 1998 Xsara 1.6

1 Answer

...Ecu has return to default and the car is running only on3 cylinders Dont think so ,i think more like a valve burnt out ,do a compression check first before playing with it ,remove all plugs and then ...

...ECU transistor was burnt and want to know what caused it? Several things can cause a transistor to burn out. Water or moisture contamination is the most common. Also, voltage spikes in the charging ...

...burnt on any ECU engine computer inside a diode may have failed ECU incl ignition key for Alfa Romeo 147 1 9 JTD 115 hp 5 doors 2004 Bosch... find a used or referbished unit with same numbers on the ...

touch the alternator and wire burnt out what happen Depends on the vehicle make and model. If older engine, possibly burnt out the distributer. If newer engine, check the ECU and ignition control unit

ecu of my range rover got burnt due to poor engine washing .I want to change the ecu to a new one . i want to buy a scanner to make a fresh programming .i dont want to copy from the old ecu The VIN is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...