Questions & Answers for: Pontiac Grand Prix btsi solenoid

Question about 2003 Grand Prix

2 Answers

...help Randy had the same problem last year. replaced the burned out fuse located in the glove box - BTSI fuse (automatic transaxle **** lock control ) Makes sense. Also, look up under the dash, on

Ad

...solenoid was told it could be the ignition cylinder or swithch. What do you think? I think that you must have been using a doblicate key to start the engine it cannot be you ignition cylinder or ...

Ad

...console to access the shifter. Service dept. lubed the BTSI solenoid. Haven't had a problem since. Service dept. said the problem may come back. 1 1/2 years & 30,000 miles later...No

Question about 2002 Grand Prix

2 Answers

Wondering what the TCC fault code is Here are the DTC's for the TCC Solenoid: DTC P0740 TCC Enable Solenoid Circuit Electrical DTC P0741 TCC System Stuck Off DTC P0742 TCC System Stuck On DTC P0743 ...

Question about 2002 Grand Prix

1 Answer

...BTSI). The shifter assembly in the console has a switch-solenoid (shift interlock) that has to send a release signal to the key release solenoid in the steering column. Replacement of the shifter ...

...fluid and coolant change, supercharger oil, air filter, fuel filter, tires, brakes, engine mounts, BTSI inspection and power steering fluid. Also inspect the belts, hoses, pulleys and look for

Question about 2004 Grand Prix

1 Answer

they don't always go into park all the way. Also if you park on a hill, it puts pressure on the btsi, so you cant shift it. Have someone push the vehicle back, just enough to take the pressure off

...when turning off engine this is normally a problem with the floor shifter assembly. either the BTSI switch is bad on the base of shifter, or one of the wires is broken to the switch. this switch ...

I replaced evap vent solenoid & dtc came back Here is the definition of the code and possible causes. P0449 PONTIAC Description The Engine Control Module (ECM) monitors the Evaporative Emission ...

took 2000 Pontiac grand prix to garage and the codes he got were Po 742a, Po446a. the mechanic had said it had something to do with the torque converter....after reading a little bit online I am a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...