fuse or the BTSI park lock fuse and see if it is blown. Also check to make sure the brake lights work. check your brake light fuse, check to see if your brake lights come on when you step on the brake
fuse panel for the 1b spot= SIG/B/U LPS/BTSI/LCM keeps blowing when I put the car into gear. Not sure whether it is because of a shortage or what? the only usually reason a fuse blows is if there
Question about 1998 LeSabre
...BTSI Fuse and is normally closed, providing voltage through circuit 1135 to the BTSI solenoid, energizing the solenoid and mechanically locking the transmission shift lever whenever it is in PARK. ...
...BTSI Fuse. The stop lamp switch is normally closed, providing voltage through circuit 1135 to the BTSI solenoid, energizing the solenoid and mechanically locking the transmission shift lever whenever ...
Question about 1998 LeSabre
...BTSI/automatic transmission shift lock control--Refer to Automatic Transmission Shift Lock Control Description and Operation in Automatic Transaxle - 4T65-E. • Bulb check--Refer to Instrument Cluster ...
Question about 1998 LeSabre
...BTSI) 31 Air Bag 32 Body Control Module 33 Hazard Flashers 34 Not Used Fuse Description 36 Ignition Signal Hot in ACC and Run Body Control Module 38 Low Blower 39 Anti Lock Brakes 40 Turn Signals 41 ...
...BTSI fuse 1B via CKT 539 (PNK) through the turn signal flasher to the normally closed switch in the turn/hazard switch via CKT 16 (PPL). With the turn switch in the left turn position, battery ...
Question about 1997 LeSabre
...BTSI fuse 1B via CKT 539 (PNK) through the turn signal flasher to the normally closed switch in the turn/hazard switch via CKT 16 (PPL). With the turn switch in the left turn position, battery ...
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
1,091 Questions
904 Questions
