Question about Shark Professional Upright Vacuum with Bonus StickVac Red Bagless Vacuum
...brush roll for clogs. If there is debris, clean the opening with scissors, carefully cutting away any debris. Uncleaned filters may also the reason why your vacuum has lost suction. To clean the foam ...
brush roller has stopped turning look on the bottom of the unit for a small reset switch button.I have not worked on this unit but many are similar. If you can hear the roller motor running you may ...
Question about Fantom FM740 Upright Vacuum
...i have checked all places. Check your hose from the end to end, you have to have something stuck in there. If its clear then your motor is not vacuuming. Also is the belt broke that spins the
repair were does the little belt hook up to It hokes up to the motor and the brush.
brush head for clogging as well as any motor or HEPA filters. If that still shows nothing, take the cover off the brush head (like you're changing the belt) and look for obstructions in there. Usually
...with this appliance please assist me at repairing it and/or what parts I may need for repairing it? Thanks T.R. IT SOUNDS LIKE YOU HAVE A BROKEN BELT, THAT CONNECTS THE MOTOR TO THE ROTOR
...the bottom there should be some screws so you can access the motor/ brush area. If the belt is not broken it may be stretched which will still render the brush from turning. Hope this helps, ...
Question about Shark Steam Mop - Gray/ Purple Vacuum
Shark SV736R motorized brush won't rotate The cordless Shark 15.6v works and picks up dirt but the motorized brush won't turn. I have removed all lint but can't find a tool to take out the ...
Question about Shark Cordless Stick Vacuum SV775R Vacuum
...stick vac motorized brush work? the motor woks but the brush won't pick up dirt. Is the brush rotating, if not the belt is broken or jammed, if so remove the bottom plate and all will be
Question about NV22 Shark Navigator Bagless Upright Vacuum
the roller brush turn on my navigator shark NV22L It could be a bad switch or brush roll motor, a broken belt, loose wire or contact. You must inspect and test all these areas to narrow down the cause
Usually answered in minutes!
1,137 Questions
143 Questions
96 Questions
87 Questions
50 Questions