...thread wind smoothly. Do not use a bobbin that is not wound smoothly because (as you already know) it could possibly break needles and damage the machine. Brother CS 80 Sewing Machine Bobbin ...
...Brother model #LS-1217 and need to know how to wind the bobbin. Do I put the thread into both the top and bottom hole of bobbin to wind? I can wind the bobbin but the thread is loose and bunches up. ...
Question about CS-8150 Computerized Sewing Machine
...Brother CS-8150 and I had 1 bobbin completed several hours before and then tried to wind a bobbin after having the machine powered up and sewing for a couple of hours and I could not get the bobbin ...
...Brother XL-2230 sewing machine has broken. The plastic bit broke at the bottom when I tried to turn it back to the default (neutral?) setting. Can I replace it or do I need a new machine? For $29 at ...
My bobbin won't wind the tread The machine doesn't wind the bobbin the motor is running thou Did you remember to put your brother into winding mode?
Question about XL-2230 Mechanical Sewing Machine
...Link below is to videos on youtube regarding winding bobbins on brother sewing machines. If you don't find an answer there please re submit your problem. Brothers Sewing machine wind bobbin ...
...as your machine, but the way older sewing machines wind bobbins are pretty similar. 1 How to wind bobbin on the Brother XL2600i sewing machine Loading thread on the bobbin old Kenmore sewing ...
Question about XL-2230 Mechanical Sewing Machine
...a LX-5500 brother sewing machine? Generally, elastic thread should be hand-wound onto a bobbin. Hand winding allows the elastic thread to be wound onto the bobbin without any stretch prior to
...Brother sewing machine? Use only the included bobbin or bobbins of the same type (part code: SA156, SFB (XA5539-151)). Turn on the sewing machine, and open the top cover. Place the bobbin on the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions