Question about CS6000i Computerized Sewing Machine
My Xmas gift sewing machine worked perfect stitching for about 18" than all of a sudden an F8 message occured and the machine kept making a clicking noise. you should put an oil to the needle bar of ...
In the beginning I didn't have any problems using my walking foot. But, now when I am quilting with it, there is a noise and it seems to be jumping around. I know it is secured on the machine. I have ...
brother cs6000i thumping noise Need to change your needle and make sure in doing so that you have it tight and all the up in the needle plug. Also when is the last time the machine was oiled? Is this ...
...cs6000i When running my machine, I get one or two stitches in and the needle slows down on it's own and starts making a horrible grating noise in the engine part, eventually stopping and ...
Question about CS6000i Computerized Sewing Machine
After interference, the needle won't reposition left or right properly. My finger got in the way when sewing, I think I pushed the needle positoning mechanism to the right. The machine made a ...
Question about CS6000i Computerized Sewing Machine
why does my machine make a knocking noise-have cleaned the bobbin works & put in new needle the machine probably needs to be serviced
motor makes a grinding noise machine developed a grinding or growling noise today. I cleaned the bobbin, but that made no difference. it sounds like the machine needs to be serviced at a sewing ...
brothe cs6000 needle bar noise noise while the needle bar moves up and down if the plastic compartment opens try using a couple of drops of sewing machine oil on the needle bar and see if that helps.
Question about CS6000i Computerized Sewing Machine
...Brother CS-6000i is making a clunking noise, not from the bobbin area, but from the right side. Any ideas? Was sewing with no noise, then started clunking near the right rear. Do I need to call ...
Question about CS-6000i CS6000i 60-Stitch Computerized Sewing Machine with Wide Table
A lot of squeezing, tight sounding noise, coming from inside. Can it be oiled?? yes, recommend a drop if 3-in-1 oil on all moving joints, connections, gears, and wipe off any excess.
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions