Questions & Answers for: broken tooth

the starter gear forward, it may be landing on top of a broken tooth, slipping off, then turning your engine over. There may be enough tooth even if broken, to stay engaged once the starter has meshed

Ad

Question about 1997 VN 800 Vulcan Classic

1 Answer

...broken tooth off gear or something of that nature A broken gear tooth will cause a clicking sound. Start out in 2nd gear going slow. Hear any clicking? If so then TWO gears need to be replaced > the ...

Ad

...broken tooth. ALWAYS replace the gears in sets. If enough pressure was on a gear to break of a tooth then the same pressure was on the gear it was engaged into. Yes, only one of the two gears is ...

...tooth broken in my Royal 10X I have I have a gear tooth broken in my Royal 10X I have to have the part number to order a new gear. Don't have a manual to get the part number. Help please. Try here. ...

Question about 1991 GSF 400 Bandit

1 Answer

...gear(s) breaks off. Remember, whatever caused the problem in the first place put pressure on both the broken tooth and the gear it was engaged to at the time. Most likely is a tooth on a slider

Question about 2004 GSF 1200 Bandit S

2 Answers

...broken gear tooth. When the broken gear is replaced, also replace any other gear the broken gear meshes with. Whatever broke the tooth also put the same pressure on the meshing tooth. If the meshing ...

Question about 2004 GSF 1200 Bandit S

1 Answer

...piece of metalt holding rubber blades in place). Grind or file an angled tooth into the end of one. Insert into lock (tooth down) so it catches on the teeht of ghe broken key, pull rod and key

broken tooth on the plastic gear. Use a very small drill bit the size of a big paper clip. drill three holes where the tooth broke off ( if part of the gear tooth is still there, file it down smooth.)

a senior with sight and dexterity probs. but i really want to fix it i probably put too much paper through and it made a noise and stopped. If a tooth really is broken, your shredder is not repairable

Does a crankshaft sprocket timing gear of a toyota raum 5E with one broken tooth cause it not to idle? Are you sure the tooth is broken? They usually have a missing tooth for top dead centre.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...