Questions & Answers for: broken malibu seat

...Malibu Maxx. I have electric seats and when I sit down in the drivers seat the right side goes down. What could possibly be the problem? Is it an easy fix? The weld has broken on the seat. Take the ...

Ad

Question about 2004 Malibu

1 Answer

...malibu There is a metal track and a braket/flange attachment..The flange is broken (poor design).. I bought a torx bit to remove the screw in the track, I dont see how to loosen the front two torx ...

Ad

Question about 2004 Malibu

1 Answer

...seat. Something is broken under the driver seat. The track is ok but the seat 'move' from right to left. Is it possible to have a schema to see what could be broken. And how to take the seat of so i ...

Malibu with broken weld on seat motor Have 2004 Malibu with what appears to be broken weld on the the motor that raises and lowers the drivers side power seat. Seat leans back and to the right. Is the

Question about 2005 Malibu

2 Answers

...malibu drivers seat is sagging on the right rear pry off any plastic bolt covers where the bolts secure the seat pull 4 bolts securing seat to vehicles floor pan Disconnect negative battery teminal, ...

...seat is loose and I can't get it to snap back in place. Is there a way to "snap" it back in place? Or a piece that might have broken off? I don't want to it fall off completely if I can avoid that. ...

Question about 2008 Malibu

1 Answer

broken driver seat Can't answer that ,no idea what is broken & no onewould be familar with every seat ever madeBroken how?Most likey has to come out of car after the problemhas been ...

Question about 2004 Malibu

1 Answer

how to remove front seat broken seat Remove the 4 bolts 1 on each corner of the seat base remove the electrical connector also

...Malibu. It works but only if you are standing really close to the car. I already checked the battery and it tested good The car unlocks, locks, and the remote start works but only if you are standing ...

malibu the two bolts that hold the drivers seat rail the nuts that are securing the bolts seem to have broken loose if I take the bolts out and the nut drops how do I reinstall Because there is no way

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...