Questions & Answers for: Saeco ODEA brew unit

odea giro plus gear that drives the brew group has broken 3 times The gear that drives the brew group has broken 3 times. we have had it fixed each time and now it is outside the warranty date. What ...

...brew unit and the machine still does not work Our machine now does not brew the coffee and spits out a steady stream of hot water from the spout in excess a cup. we have cleaned the brew unit as per ...

...brew unit gears is set on the N, check the little arrow next to the handle. Then check the rotation of the machine, by turning it on closing the door so that it can reset itself. Then look at the ...

...brew unit. Talea Giro The triangles indicating the rest postion are not lined up. The unit is still in the machine. The triangle is at the 12 o'clock position and it needs to be in the 3 o'clock ...

...you can remove the brew group easily, it should go back in easily. Make sure the brew group is in neutral position(2 arrows pointed to each other) and the latch behind the unit is in the top

...brew group. google "Odea technical service manual ". look at section 5.1.1 on how to put it into test mode. hold down hot water or steam button while turning on the machine until the leds flash ...

...brew unit requires cleaning and regreasing as per the instruction manual. I've the same problem regularly, each time it costs about 80$ for "repairing". I'm sure the cause is not the brew unit. Can ...

...brew unit in your hand like you are about to put it in the machine, you do not need to push lever to put unit in machine only when removing. Now turn unit 180 degrees notice little latch in top of ...

...brew unit so I noticed that I can put the brew unit all way up. The upper light flashes when it reaches the top but the problem is that a second after it starts its movement from the lower point the ...

...brew unit gets stuck and if removed in order to reset the alignment of the gearing wheel in the machine, it does not align in order to get the brew unit back in place. Problem started when descaling ...