brew unit is stuck, tried to do a rinse cycle but no water coming out so tried to take brew unit out to clean and brush out but its stuck.... can you take it out mid rinse cycle. It seems to be locked
brew unit in and it got stuck. I was finally able to shimmy it loose, but now can't get it back in. It still says rinse cycle and brew unit missing. How can I reset this and get the brew unit back in?
...it's brew unit is blocked My gaggia titanium coffee machine says it's brew unit is blocked is it an easy repair? Try cleaning and relubing the brew unit. If that fails you require a new main
...brew unit is displayed,the cause is the brew unit needs to be to cleaned of all old grease and coffee grounds. Once cleaned you will need to regrease the big oring at the top of the brew unit,pretty ...
Question about Titanium Espresso Machine
...brew unit and greased all moving parts plus o ring but the machine is still saying brew unit blocked put a peice of card in the microswitch without the brew unit in just the same came up any help ...
Question about Syncrony Compact Digital Espresso Machine
...brew unit blocked" appeared this morning, but didn't reappear after I emptied the dreg drawer and removed, then replaced the brew unit. Any Thoughts? Brad First clean the screen and tube on the brew ...
Question about Syncrony Compact Digital Espresso Machine
...brew unit is blocked bu... The machine is showing the brew unit is blocked but we have taken it out and cleaned it but this makes no difference. Does the brew unit try to move at all? You can listen ...
Brew unit missing error. I have tried everything i can think of; - cleaned the inside - removed and inserted brew unit multiple times - switched machine on/off (including leaving it off overnight) The
brew unit is stuck Open the door. Remove the dredge drawer, drip tray. On the left side of the brewing unit, and towards the back of the brew group, there is a single screw. Remove the screw. Grab the
...brew unit all the way in. This started when the brew unit was not properly inserted when the machine was turned on causing it to jam. I found the instructions that said remove a screw, pop out the ...
Usually answered in minutes!
572 Questions
236 Questions
122 Questions
110 Questions
75 Questions