Questions & Answers for: Nissan Maxima break switch

...them hook there scanner up and turn your break light off for you (unless you can disconnect battery to erase the break light i don't know). you may have just triggered the switch for (to low

...could be the problem? Really hope you can help. Thanks, Maureen test the wires that come from the break pedal, to the break light, it might be a break in one of the wires. or you might just need to ...

...switch that the break petal hits its under the dash and when it goes bad the lights will stay on just replace the switch and thats it not to easy to change its kinda awkard to get to but if you are ...

...break switch and it seems to work (has continuity) also the break lights come on when I press the break pedal. I just replaced the solenoid assembly which I purchased from the dealer. no dice. the ...

...break system and checked all fuzes try changing the brake light switch ,but before you do check for feed to the switch as iam not sure if this is a american version with them funny stop lights that ...

...break light on off switch which is connected to the break pedal as you push the pedal the break light is on and when you release the pedal light goes off just look along side the pedal upwards there ...

break light switch was blown because my breaks stayed on constantly and would kill my battery, so id unhook and hook my battery back up as necessary to keep my car from dying and then randomly one day

...break light switch on 98 maxima its just a little switch that bolts on to the petal i think its a 12mm or 10 mm nut. step 1) unhook the battery. step 2) locate switch to do so just lay on back with ...

...break light switch I would check the brake switch & the shift solenoid, if that applies, that releases the shifter A wiring diagram is a must, unless your just testing the solenoid Also there may ...

...area this is a prone area that flexes the wire when opening and closing the door causing wire to ...