Questions & Answers for: Geo Prizm break switch

geo aren't working. could it just be a bad fuse? since both went out at the same time? Chk. fuse, if its ok, than it could be the break light switch, witch is under dash and works off the break peddel

break light stay on. I broke hard this morning but after I turned off my car the lights remained on. HELP! try pulling up on the brake pedal or smackin it s few times,it sounds like u need a new brake

my brake lights are staying on where is the fuse so my battery doesn't die the switch for the brake lights are attached to the break pedal. Check if got loose or went out from its place.

...switch. insert the paper clip. You should take the negative battery cable off while doing this. Now turn the key back and forth moving the paper clip in and out and the same time. I havn't doen this ...

...break lights stay on causing my battery to die when car is off? Generally, a push button type switch is pushed on by the lever that the rubber pedal moves when stepped on. When the pedal is released ...

The brake lights will not go off, I have to take the battery of lose check for a bad break light switch under dash behind brake pedal.

...switch and turn off the break lights....if the toggle switch goes out they wont work also have some one stand behind the car and wiggle the wires of the toggle switch see if it has a bad connection ...

breaks lights don't work Here are some things to check:- 1 The brake light switch 2 The fuse for the brake lights 3 The bulbs for the brake lights 4 The bulb contacts in the brake lights 5 The earth ...

...Its going to be inside the steering column near the ignition switch. When you turn the ignition it unlocks the steering lock. You can't really manually unlock it unless you break the lock ...

...bad earth for the globe socket. First maybe try and disconnect the pedal switch to ensure that its breaking the connection properly and turning your lights on and off. Depending how handy you are, ...