Questions & Answers for: Buick break switch

cruise control wont work 94 buick pa i have a felling its ur cruise control switch might be falty its located on top of the break switch u cant miss it fallow ur break pedal hope it helps

...break lights dont come on when i press the breaks but the lights do work fine when i turn them on Unless both bulb filaments went out, there is a switch that the brake pedal sits on when released. It ...

...break light switch.. Its located on the break pedal brace just above the break pedal.. Hope this helps !! rate me good ;o) Its the turn signal switch inside the steering column! It knocks out the ...

BREAK PEDAL THE SWITCH IS TO FAR AWAY FROM THE PEDAL TO OPEN THE SWITCH. THERE ARE A FEW TYPES OF SWITCHES THE MOST COMMON ARE ADJUSTABLE CHECK AN SEE HOW TO ADJUST AND THIS SHOULD CORRECT THE PROBLEM

switch and see what happens. If you have to remove the panel, go to O'Reilly's or AutoZone and get a door panel removal tool. This will pop the plastic clips around the door panel. You may break a few

...not the switch. These are vacuum control switches. There is a vacuum line that comes thru the fire wall. They get brittle and break. Most of them break under the hood. I would check this

...no spark. Changed ign module, coils, crank senor, maf sensor, computer, ign switch. Traced wires no breaks fuses and fusible links are good. What can i do next? the crankshaft sensor has to be ...

...I have changed bulbs and also break light switch the brake switch sends power to the turn signal switch and then on to the bulbs. Brake lights are on a separate fuse. Check both areas for the ...

...break switch to reset it or replace it as break lights are one. model is the six cly 3.1 Kick switch is right on back of break pedal meaning short of moving seat all way back and becoming a gymnast ...

...break light switch in Buick trying to change break light switch Remove the left sound insulator. Rotate the stop lamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch. ...