Questions & Answers for: brake lights 1999 silverado

Brake lights on my Chevy Silverado do not work but the Cab works The turn Signals, reverse lights, and flashers all work. But when I press on the brake the tail lights do not work and the Cab light ...

...brake lights come on and stay on until I shut off/restart the truck. Then other times it will work fine when I push the brake pedal. Any ideas? Check to see if the caliper bolts are installed ...

...Brake lights on 96 Silverado, cruise will not come on, tail lights ang turn signals work Check BRAKE LIGHT SWITCH Check the brake light switch it is located on the brake pedal arm.Its like a push ...

brake lights are working fine. I used a test light and there is power to the cargo lamps but not to the brake light even though it is the same assembly (separate wires, obviously.) I checked the fuses

...brake wiring and a factory harness, however i need to switch out the harness at the rear of the truck to a 7-pin, do i need to order that part from chevy and will the trailer lights and brakes work ...

...brake warning light in the IP is always on in my 1999 Chevy Silverado is always on. Any ideas what the concern might be? Hi: Your vehicle has a dual brake system, and the light usually indicates that ...

chevy silverado, and the brake lights are not working. i have checked the fuse, and it is not a fuse problem. check the brake light switch at the pedal 30 amp brake/hazard fuse under the hood is burnt

...brake lights on my 1994 cheyv silverado 4x4 1500, changed brake light switch, changed tali light boards, check ground, Third brake light comes on, has aftermarket trailer wires, brake light indicator ...

My brake lights on 1999 Chevy silverado are not working,what is the problem? check the fuse, check the bulbs, check the brake light relay

lights will go out but don't forget your brake is on . In the 1999 Chevy Silverado 1500, the headlights are not designed to be on all the time by default. They are typically controlled manually by the