Questions & Answers for: Dodge Ram 3500 brake lights

...Brake lights I don't have signal or brake light but I do have head and marker lights directional stop working! Can't locate flasher can unit The flasher unit is located under the dash, near the ...

changing a brake light switch on a 1998 dodge neon how do you replace the brake light switch on a 1998 dodge neon,photos would help if you look under dashboard toward the top of the brake pedal ...

...BRAKE LIGHTS BUT ALL BULBS AND FUSES SEEM OK. NO REAR OR BRAKE LIGHTS BUT ALL FUSES ARE OK AND THE BULBS SEEM OK TOO. check the Switch under the dash on the brake peddle . it could be stuck or broken ...

brake warning lights came on. I checked for leaks, brake fluid and brake pads and all was fine. brakes work good. How do i get the lights to go off? they have been on for over a week and i have driven

ABS, BRAKE LIGHT INSIDE WILL NOT GO OFF Your brakes are telling you they require service. Please take your car in for important brake service. Thank you for your interest in FixYa.com did you checked ...

...Brake lights won't come on. Replace light bulb and fuses. Under the dash, follow your brake arm up and you'll find a switch that this arm pushed against (brake light switch). Check to make sure your ...

...brake lights don't work. Replaced the brake switch to no avail. Where do I go next? Haven't got a wiring I have a 2006 Dodge 3500 Diesel 4x4 dualy and the cab brake light works, but both rear ...

brake lights 99 dodge 3500 4wd I have power at the brake switch, power at the turn switch, fuse, have power at the main plug behind the left inner fender. But i have no power at the rear at the lights

brake lights 3500 2007 have no rear signal lights, brake lights. have changed signal stat, brake switch, checked bulbs and fuses. what do I check next Get a test light probe so you can see where power

...brake lights The high mount brake light gets its own signal from the brake light switch (on the brake pedal). Or at least the wire leaving the brake light switch will splice, one wire to the high ...