Questions & Answers for: kawasaki brake lights

brake lights dont work i changed the fuses and bulbs any suggestions. thanks. riveraneo bad ground on the brake light circuit or brake switches both need adjusting, this is unlikely that both switches

my brake light is stuck on Check the brake light switches at front brake lever & rear one is stuck on! Ride-Safe Bike-Doc Please mark this as helpful (if it has been!!)

brake light doesnt work when either or both brakes are applied tail light works and it has correct bulb You need to remove the bulb and check to see if you are getting voltage to the socket when you ...

...the brake and one for the lights. When one blows it can short to the other circiut. Make sure you get the exact same bulb with the same numbers like 12v21\5 which is 12 volt 21watt stop and 5 watt ...

Brake lights dont work on my 2001 kawasaki vulcan motorcycle Not sure if you have fuses for that particular function on that bike, but check there first. Then check to make sure the wires are all ...

rear tail light on a 86 kaw 454 ltd not working but brake light does work when brake is applied Try changing the bulb first, before looking for other issues. Usually a combination brake/tail light has

Brake light on my 1999 Concours appear to be stuck in the "on" condition. When I first start the bike they are normal tail light brighness, once the brake is applied the first time, they ...

...brake lights Hey Guys, I have a 95zx9r my running light or brake light won't come on in the rear. I can take a light tester and turn on the switch and press the brake and fire there.. but ...

...brakes. Disconnect and clean each pin connector. If that doesn't work, maybe run a jumper line from a brake light ground to a frame ground source. If the lights come back on, the ground is the

...brake lights. Get a pack of fuses. Remove left side bulb. Brake, does is blow the fuse? Remove right side bulb. Brake, does it blow the fuse? If yes to the above, it is the light fitting or wiring ...