Questions & Answers for: brake light goes lights

...brake is touched. Coul there be a brake problem? you most likely have a wrong brake light bulb. if the bulb is a different wattage it will still work but the bulb warning light will still

brake light filiment goes on when brake is applied.The extra filiment makes the tail light go brighter.If both filiments are on when lights go on then applying the brake won't change the intensity.You

...brake light switches one on the front brake master cylinder and one connected to the foot brake lever. First Check your rear brake light switch adjustment loosen it until the light goes off, if not ...

...BRAKE LIGHT SWITCH GOES TO THE CENTER BRAKE LIGHT. THE OTHER WHITE WIRE GOES FROM THE BRAKE LIGHT SWITCH TO & THROUGH THE TURN SIGNAL SWITCH SO THE LIGHTS CAN BE USED AS BRAKE LIGHTS OR TURN ...

...brake light switch I guess. Where are the two wires from the brake light switch suppose to be connected one wire is 12 volt power all the time weather the key is on or not, the other wire goes to the ...

...brake light out-mine does it also-if u find no tail light brake light out then check out the brake light in the middle of the hatch.   one of these small bulbs may be ...

...brake light switch itself and no left blinker but the right side works and turn the flashers on and they both work just fine Check the brake light fuse. Check that one of the brake light fuse ...

...brake warning light. After I add brake fluid the brake warning light goes out. Any suggestions on what this could be and is it expensive to fix? Check for leaks around calipers....front and rear. ...

brake light gets its own signal from the brake light switch (on the brake pedal). Or at least the wire leaving the brake light switch will splice, one wire to the high mount brake light, and the other

light brake light. left and right brake lights do not work Look behind your brake pedal there is a brake light switch with plunger when you press brake it goes in and turns on brake lights bad switch.