fuse #6 is for brake lights, and fuse #7 is for all of the interior lights. I believe the fuses are labeled by number and they also have a designation under them. None of the descriptions specifically
Brake lights work when car is turned off but when running they only work a small fraction of the time check fuses first Second replace break light happens on all model one the light is cause a short ...
No brake lights on '04 Escalade I checked the fuse and bulbs all work fine....what next? foot brake sensor switch at the pedal, get an mechanic to test this.
...not sure what to do? Your brake light circuit runs thru your turnsignal switch if your hazard switch is on your column I have seen numerous inop brake lights caused by faulty turn signal
...brake lights and abs light is on in the dash lights on a 1994 olds cutlass supreme...checked bulbs, fuses and changed the brake switch...none of that worked...all the other lights work fine...can not ...
brake light switch that is attached to the brake pedal has either come loose or needs replacing so have a close look at your brake pedal and right at the top you will see the brake light switch have a
1994 olds custlass supreme brake lights are out fuse is good put new brake light switch in still out park and turn works but no brake light all bulbs good Replace the turn signal switch.
94 Oldsmobile cutlass supreme brake lights won't work, the blinkers and parking lights work well you should check the fuses under the dash and if that's not it so models have more fuses under the hood
two out of three brake lights are out bulbs o.k. fuse is good what else should be checked COULD BE A BROKEN WIRE TO BRAKE LIGHTS!
brake lights dont work Are you check the fuses and bulbs? Also, check the brake switch, this generally is located in back side of brake pedal. Keep us updated.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions