Questions & Answers for: brake disc wear limit

...anybody has encountered the same problem? If one disc is wearing down more than others, a possible cause could be a sticking brake calipar, or more pressure is going to that brake than the other

disc brake rotor wear limits what is the minimum disc thickness recommended on the front brakes of a Mercedes 240 E class estate, 1999 model year please? hi,depends your chassis number,if 210.055 your

...disc brake pads. Examine brake disc surfaces. Clean brake pad contact points in calipers. Grease wheel center hubs. Check steering for absence of play, condition of suspension track rods, front axle ...

...brake pad. When the pad is remove & you look at the surface in the right light you can see differences in the texture of the pad. This is sometimes caused by the bonding agent, used to adhere the ...

...brake discs & pads when I bought it. Has had new fan motor for cool air and a/c and it. Has had engine emissions etc checked and its running at perfect limits apparently, have had this ...

...disc wear ridge is to jack up the car at the corner you're working on, remove the wheel and to then firmly support the car with an axle stand (vital). Chock the rear wheels and apply the handbrake. ...

...disc (front brakes) or drum (rear brakes on some models). Problems with the calipers can also cause intermittent grabbing, which would make that wheel vibrate.A bad wheel bearing is another ...

...brake disc. It is very rare that they warp. Most likely the last people to disturb the brake discs or to fit replacements did a lousy job; did not clean the mounting faces thoroughly or check the ...

Wear limit on front brake disc xt125r 06 Don't worry about limit if the disc is not warped or gouged, just replace the pads and be done with it. have fun ridin bro!

...it maks noise and the front drivers wheel tries to lock up...but it doesn't do that in reverse check brake pad/disc rotor condition. Check front wheel bearings check CV joints for wear and