Questions & Answers for: Chevrolet Blazer brake bleed

Question about 1996 Blazer

1 Answer

...brake line then remove bleed screw from caliper and let fluid gravity flow down to calliper then bleed the normal way. more than likely your master cylinder has air trapped in the front portion good ...

Ad

...bleed the brake pressure modulator valve next. Follow this sequence if it is necessary to bleed all four wheels: 6.1.Right rear wheel cylinder or caliper. 6.2.Left rear wheel cylinder or caliper. ...

Ad

Question about 1995 Blazer

3 Answers

brake mastercylinder or overhaul it..... its better you replace it. Hope this helps! If the brakes are spongy, THERE IS STILL AIR IN THE SYSTEM. Bleed brakes again, and a 3rd time if necessary. If you

Question about 2001 Blazer

3 Answers

...brake fluid,petal still spongy .we have bled brakes twice. it didn't get no better. leaky rear break cylinder or master cylinder Why are you bleeding the lines, What was replaced that required you to ...

...bleed valves, use them to get the air out...if not, step down lightly on the brake and at the same time, loosen the line fitting a bit till fluid comes out. Then, bleed rear brakes the same way using ...

Question about 2001 Blazer

1 Answer

Just changed rear disc pads and one caliper on 2001 Chevy Blazer...now rear brakes are not working at all...fluid is in lines as it comes out when bleeding...help! the problem here is in order to ...

...bleed brake line after replacing rear rotors and pads.. not getting any pressure.. have you had problems getting pressure to the rear brakes before? if yes it is proportion valve problem if no try to ...

...brake fluid) all the bleed nipples. Now make sure there is fluid to the maximum in the master brake reservoir. Stand on the brakes to extend all the slave pistons as far as they can go with the ...

Question about 2001 Blazer

1 Answer

brake fluid. Open the bleed screw 1/2 to one full turn. Slowly depress the brake pedal. While the pedal is depressed to its full extent, tighten the bleed screw. Release the brake pedal and wait 10-15

Question about 1999 Blazer

1 Answer

...is purged from the M/C. Then, after installing the M/C, you can bleed the individual brake lines in the normal manner. See this youtube video for assistance... How to Bench Bleed Brake Master ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...