Questions & Answers for: Toyota 4Runner brackets

Question about 1992 4Runner

4 Answers

clucth pedel the clutch pedel will not release stays down on floor board hey man, i had a similar problem you should look under at the clutch bracket to see if that broke then check above the same ...

Ad

Question about 2003 4Runner

1 Answer

I have a 1998 4Runner 5VZ-FE engine. I have the starter unbolted, but I cannot get it out of the compartment. How doe I get it out? i have the same runner and when i changed my starter twice!!! buy ...

Ad

Question about 1990 4Runner

1 Answer

1990 toyota 4 runner smelling gas. i could smell the gas inside the car when the engine is running even when doors and windows are closed. do you have any idea where it is coming from? Thank you for ...

i can smell the fuel fumes inside the car when running even when the windows and doors are closed i can smell the fuel inside the car when its running even when the windows and doors are shut. any ...

Question about 1990 4Runner

1 Answer

How do you replace the fuel pump? Fuel pump on EFI 4runners is located inside the fuel tank. Remove tank to access the pump. Remove 7 bolts then pull the pump bracket up and out of the tank. Remove 2 ...

White plastic bracket holding headlight What is that white plastic bracket that holds the headlights and allows it to be adjusted called? headlight bracket, headlight adjuster, or headlight adjuster ...

need to replace the fuel tank on a 1994 4Runner, but need to know what other parts to get with it. Obviously the in-tank fuel pump, the fuel strainer, seals, but....is there a sending unit as well? ...

Question about 1991 4Runner

1 Answer

I have a 91 yota pickup with the 22re. It is a 5 speed manual, over the last couple days i have started noticing a noise which is now much louder and more pronounced, at first i thought it was ...

Question about 1989 4Runner

1 Answer

where's the cranck sensor located? Click the boxes with a red x in them to see diagram images.5VZ-FE Engine Disconnect the crankshaft position sensor harness. Fig. 1: Exploded view of the crankshaft ...

trying to replace the stop light switch on a 1986 toyota 4runner brake lights dont work. this is the last thing i know to do Move into a position where you can easily see underneath the driver's ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...