Questions & Answers for: Mitsubishi Eclipse brackets

belts my power steering belt is making a high pitched sound and im missing a bracket that looks like and adjustment. I think that the missing peice is whats causing the sound but i dont know what that

Needs pics on how ro reinstall stock air filter housing on a 2002 mitsubishi eclipse. Any advice? it is not hard, you simply start by putting the outter hose on first and bolting it down if needed.. ...

HOW TO INSTALL FRONT BRAKE PADS AND ROTORS ON A 1997 MITSUBIAHI ECLIPSE take the front wheels off,remove the 2 bolts holding the caliper to the caliper mounting bracket and then remove the caliper and

How to install a front license plate bracket on a 2001 Mitsubishi Eclipse. if it is a factory bracket there are 4 dimples on the middle of the bumper,you have to drill 1/2 in holes to install 4 ...

Location of the fuel reay switch The fuel pump relay for the 2.0 non turbo is mounted on a bracket at the left rear of the engine compartment. On the 2.0&2.4 turbo it's located behind the center ...

...engine and take up the engine weight. Remove the engine mount bracket. Remove any torque control brackets (roll stoppers). Note that some engine mount pieces have arrows on them for proper

how do i replace the ignition switch? Removal Remove steering wheel and combination switch. See STEERING WHEEL & AIR BAG and COMBINATION SWITCH . Disconnect ignition switch electrical connector. ...

how to replace alternator on 2000 3.0 mitisbishi eclipse Disconnect the negative battery cable. Remove the headlamp washer reservoir tank. Remove the condenser fan and upper radiator insulator. Loosen

How often do you recommend regular servicing of the transaxle on a 2000 Misubishi Eclipse GT? Is there a replaceable filter? A complete flush should be performed every 50,000 miles. Sp3 fluid should ...

What is the correct torque for the front caliper mounting bracket bolt and front caliper guiding pin? 74 ft-lbs (plus or minus 7 ft-lbs)