Questions & Answers for: Husqvarna brackets

I have a Huskystar C20 sewing machine and the bobbin case spins when i sew, causing the needle to hit it. How can I stop this? Take off the needle plate. There is a bracket near the front right area ...

husqvarna YTH2348 hydrostatic transmission slipping my husqvarna yth2348 hydorstatic transmission seems to be slipping. Is there an adjustment or something i can do? Check your tensioning bracket, ...

Husqvarna ST927E snow blower. The mounting bracket for the auger end of the auger engagement cable is broken off. This is a 1998 model so the mounting bracket is welded not bolted. I see the new parts

I have a husqvarna lawn tractor that came with a 50lbs weight and bracket. It did not come with the installation for the bracket and weight. Without a picture I will guess this is a rear weight kit ...

Replacing pump belt on 968999258 model (Kohler) I have removed the clutch bracket, disconnected the wires from the clutch, loosened the tension bracket and still cannot get belt on and I'm ...

...PTO lever. Look for a stiff PTO cable, stiff pivot bracket, missing return spring, broken spindle brackets and broken deck bracket welds. Of course you should never work on any mechanical device ...

clutch cable installation Put your mower in the lowest position and open the hood. 2 Lift up the retainer spring that holds the clutch cable to the adjustment bracket. Pull the cable out of the ...

When beginning to move, the yth2348 mower clutch spins and cuts the green wires in two. There should be an anti rotation bracket on the side of the chassis too stop the whole clutch from turning, only

Replacing a damaged top lid from a viking designer se Lid got damaged and ordered new one from a Husqvarna dealer. While waiting for it to come in, I decided to remove the old lid. When doing do, I ...

How to install a Husqvarna leaf bagger The bagger installs by using the supplied bracket on the rear of the tractor. Mount the frame of the bagger onto the bracket. then connect the discharge tubes ...