Questions & Answers for: Buick LeSabre bottom bracket

...bottom, and need to be gently pried up, ideally with the tool designed for this. At the back of the armrest there is a reflector, a sort of triangle shaped thing, which must be removed, by working a ...

Ad

...bottom of PCM rearward over locking tabs and downward to remove. INSTALL OR CONNECT PCM into bracket, making sure PCM is up over locking tabs and locks into place. PCM connectors. Enable SIR

Ad

...pump aside. Then without removing the motor mount. Use a 1/4 inch drive socket inside the motor mount bracket to loosen the bottom bolt. Then use just the socket and short extention to remove

Question about 1993 LeSabre

2 Answers

...bottom. The cover can be moved out and you can see the big 15MM headed blts that hold the starter on. On the other end of the starter there can be a bracket bolted to the starter and the block take ...

Question about 1993 LeSabre

1 Answer

...bottom two bolts on the torque axis (front) engine mount. Remove the A/C line clip and top two bolts on the torque axis engine mount, then remove the mount. Remove the 2 bolts and nut attaching the ...

...bottom of the column. Multi Function switch (has a bracket on the right side of the column tube that it sits in) wiper switch, air bag (if any), Cruise control (if any), Dimmer switch (on the left ...

Question about 2001 LeSabre

1 Answer

...time consuming. First, take off your negative connection on battery. Drain radiator from bottom plug or drain. You will have to remove the cooling fan assemblies: unplug electrical ...

Question about 2002 LeSabre

1 Answer

...just get them tight. If you talking about the nuts for the stabilizer links tighten them until they bottom out on the bolts or until the urethane bushings are squished and become the same size as the ...

Question about 1995 LeSabre

1 Answer

...bottom bracket that presses into the groove of the battery, you need along extention with a 3/8 or close to that size socket. Loosten the bolt quite a bit until the battery is able to be wobbled from ...

...bracket comes off. The bottom of the shock is held on by 2 bolts that go through clips instead of nuts. Oil these and remove. You will need to transfer the top mounting bushing assembly to the new ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Manuals & User Guides

Loading...