Questions & Answers for: Ford Contour booster

1996 Ford Contour GL 2.0 liter 4cyl. engine bi/fuel brake booster line broken. Hello My name is Thomas; My brake booster vaccuum line has broken off, and I don't know where it connects to on the ...

Ad

...floor to stop. No sweaking or squealing when stopping. Not shaking like a caliper is stuck. Power booster went or what? Chk. for vacume to booster, or loss of vacume like a break in vacume hose, do ...

Ad

Question about 1998 Contour

1 Answer

99 contour missing and cuts off new timming belts new plugs and wires and positioning sensor and seems like brakes went out ... no pressure Vacuum Leak at Brake BOOSTER Will Correct Both Problems

Where can I find a picture of the brake booster vacuum hose line on a 1995 Ford Contour? A good place to find reference material about certain model vehicles other than searching on the Internet is ...

I have a loose hose that I can't find where it goes, one end is from the brake booster. The breaks don't work so that may be the problem. I was told it goes on the side of the intake, I can't locate ...

on a 1998 ford contour what is the line that run from the intake to break booster This is the vacuum line that boost the pressure you apply to the pedal. In other words, without this line you do not ...

the line that connect from the intake to the brake booster This is a vacuum line. It produces vacuum to the brake booster which in turn makes it easier for you to press the brake pedal to stop. One ...

Question about 1996 Contour

1 Answer

...and silver--it hums like something is running--what is it? should it be humming? That is the power booster for your brakes. It's controled by vacuum so you could possibly have a leak in the ...

Question about 1996 Contour

1 Answer

...item, like high beam head lights it will do the same. Another possibility is a faulty power brake booster; applying the brakes would cause a loss of engine vacuum if the booster were faulty-this is ...

Question about 1999 Contour

2 Answers

Replace power brake booster unbolt the master cylinder from the booster and remove from it carefully so you don`t damage the brake lines. undo the vacume hose from booster. disconnect the brake pedal ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Contour
1998 Ford Contour

875 Questions

1999 Ford Contour
1999 Ford Contour

534 Questions

2000 Ford Contour
2000 Ford Contour

405 Questions

1996 Ford Contour
1996 Ford Contour

353 Questions

1995 Ford Contour
1995 Ford Contour

309 Questions

Manuals & User Guides

Loading...