Questions & Answers for: bolt engine pontiac g6

...engine and trans so that the pivot bolt could be moved forward enough to pull clear from the control arm. The control arm drops down, so that the sway bar does not have to be loosened or removed. ...

How do you change oil in a 2008 Pontiac G-6 Coupe the drain bolt is under the engine 15mm hex,the filter is on front of engine.

...pontiac g6, removal and installation? The wiper motor and transmission is located in the engine compartment at the top. Remove the black box that slightly covers the windshield bottom. You will be ...

...thermostat housing and the engine block. To install, reverse above procedure. Torque the thermostat housing bolt/stud to 18 ft.lbs. Fill radiator and check for leaks. I hope this helps. Regards, ...

...pontiac g6 gtp and how to install it It should be under the connection of the top hose, engine end. The thermostat housing there is bolted to the head. Unbolt it and remove the thermostat, make sure ...

...g6 show me the engine side that the temostast The thermostat is where the radiator hose goes into the top of your engine. Not sure the side but there should be an outfit the hose slides on that has ...

...pontiac g 6 4 cylinder Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. ...

pontiac g6 3.5 liter engine Here's a video on replacing your thermostat Keith. 2007 Pontiac G6 3 5 V6 thermostat It should be in the part of the engine where your top rad hose fastens into your engine

...Pontiac G6? The fluid lines hits one of the engine brackets. REmove the transmission mount bolts so you can lower the engine cradle. If I remember correctly, you need to drop the back of the engine ...

...the right headlight to improve access but i'm not sure how difficult it to remove. If you google "2008 Pontiac G6 Thermostat location you should get plenty of images of where it is on the