Questions & Answers for: Nissan Maxima bolt

...the bottom right corner... remove the shields and it's right there... take the lower adjustment bolt out , the upper rear bolt and the upper outer bolt out , drop it down and swap wires and ...

...driving belt for Nissan Maxima 1997....Thank you for your help check this out loosen the the two bolts (show on the figure above) first loosen also the bolt used for adjusting tension. remove the ...

Exhaust Manifold giving me trouble One of the bolts snapped off in the head and I can't find a diagram of the motor. how hard is it to take the right side head off so i can take it to a machinist and ...

Bolt torque specs for flywheel, pressure plate, bell housing bolts for 97 Nissan maxima 1.Flywheel - 61 to 69 Foot Pounds 2.Pressure Plate - 25 to 33 Foot Pounds 3.Bell Housing - No specs found. I ...

...harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt (it is the one that

need to adjust the fan belts Which one? The A/C belt is adjusted from the top. Loosen the bolt that goes through the Idle pulley then turn the adjusting bolt next to the pulley to tighten or loosen. ...

How do I replace the alternator on a 1996 Nissan Maxima? This alternator has two mounting bolts, one on top (adjuster) and one at bottom (main bolt) You need to untight the top one but not completely,

i cant get the power steering pump to move on my 1998nissanmaxima.ive loosened the tie down bolt and the jack bolt but it wont budge.am i missing something? yes, look at the rear of pump to loosen ...

...there a way to tighten the belt? look down at the alternator,you will see a 4"long bracket with a bolt at each end.on the front.and 2# locking bolts underneath the alternator.loosen all the ...

...fan on 350Z Drive belt Alternator and A/C compressor harness connectors Upper and lower alternator bolts Alternator Install or connect the following: Alternator Upper and lower alternator bolts. On ...