Questions & Answers for: Chevrolet S 10 bolt

...be greatly appreciated ........i know i can easily do this with some help....... the 2.2 engine top bolts from left to right is 8-4-1-5-9-your bottom bolts left to right is 7-3-2-6-10 this is your ...

Ad

Power Steering Pump Pulley on a 1994 Chevy 2500 454 Eng. The pulley seems to have an allen bolt holding it in place.  We've tried turning the bolt with an allen to no avail.  Is it really a ...

Ad

Question about 1998 S-10 Pickup

2 Answers

How do you replace the water pump? How do I replace the water pump in my 1998 Chevrolet S10 Pickup? PLEASE DON'T FORGET TO RATE!!!! After removing the cooling fan assembly, remove the water pump ...

What are the torque specs for the main & rod bearing caps on a 2000 chevy s-10 2.2? The head bolts are toque to yield on these engines, meaning that once they have been torqued to specification, ...

Question about 2000 S-10

1 Answer

...tool such as J-25034, or equivalent onto the power steering pump pulley. While holding the pilot bolt, turn the tool nut counterclockwise in order to press the drive pulley from the pump. NOTE: ...

Question about 1997 S-10 Pickup

1 Answer

...EngineTo Remove: Drain the cooling system. Remove fan assembly. Loosen the water pump pulley bolts. Remove or disconnect the following: Drive belt Water pump drive pulley bolts Water pump

Question about 1997 S-10 Pickup

1 Answer

trying to take out an automatic transmisson out of a 1998 chevy S-10 got all the bolts and electrial and hoses lose but transmission is still hung up need help Did you take out the bolts that connect ...

Question about 1997 S-10 Pickup

1 Answer

head torque and pattern Need head torque and pattern The S-10 had two (2) different head bolts, a long bolt and a short one . The torque on the long one is 46ft./lbs. and an additional 90 degrees . ...

Question about 1997 S-10 Pickup

2 Answers

...also removing transfer cases do not try this alone have someone help you remove transfer case mount bolts raise transmission and transfer case with Jack under transfer case remove the cross member ...

I need torq specs and pattern on a 2003 s10 2.2L Main bearings, rod bearings and head bolts, Thank you Main bearings--31 ft lbs then turn 70 degrees. rod bearings--38 ft lbs. First step--Cylinder head

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...