Questions & Answers for: Chrysler PT Cruiser body mounts

Question about 2006 PT Cruiser

1 Answer

body just shudders. i did hear a clicking noise right before each shudder, which i think came from under the hood, but i could be mistaken since i have hearing loss. my wife took it to the dealership.

Ad

Question about 2002 PT Cruiser

2 Answers

...mounts to the cylinder head with 2 10mm bolts and a metal gasket. There are 2 vacuum lines that go to the control solenoid, a black plastic pod moounted under the throttle body. It clips into the TB ...

Ad

...mounts to is pushed outwards approx. 3 inches. Is it repairable? Yes you should be able to have it repaired at a good body shop. It will be expensive but repairable. thats a lot of force and a lot of ...

...is connected to the body by a rubber mount this keeps the engine at proper height absorbs vibration and hold engine in place.the trans axle is mounted to the sub frame with fluid filled rubber

2001 PT cruiser dies going down the highway. turns over but won't start again. took out spark plugs and there was oil on the plugs??? The liquid on the plugs may be gasoline that looks like oil. If it

Question about 2002 PT Cruiser

4 Answers

...mounts to the cylinder head with 2 10mm bolts and a metal gasket. There are 2 vacuum lines that go to the control solenoid, a black plastic pod moounted under the throttle body. It clips into the TB ...

...nut and tighten. Install the axle retaining nut and tighten. Install the pencil strut, refer to the body. Install the B+ terminal nut and wire and tighten to 11.3 N.m (100 ins. lbs.) . Plug in the ...

2004 Chrysler PT Cruiser with P0172 Error Code. Hello everybody, I recently purchased a 2004 PT Cruiser Touring with the 2.4L Turbo engine. It has 57k original miles and was sitting for the past 2 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...